A monitor is used for the user to see what the appilations on the computer are doing. A visual display unit, often called simply a monitor or display, is a piece of electrical equipment which displays images generated from the video output of devices such as computers, without producing a permanent record. Most newer monitors typically consist of a TFT LCD, with older monitors based around a cathode ray tube (CRT). Almost all of the mainstream new monitors being sold on market now are LCD. The monitor comprises the display device, simple circuitry to generate and format a picture from video sent by the signals source, and usually an enclosure. Within the signal source, either as an integral section or a modular component, there is a display adapter to generate video in a format compatible with the monitor.
Problems with a computer Monitor.
Dead pixels
A few LCD monitors are produced with "dead pixels". Due to the desire for affordable monitors, most manufacturers sell monitors with dead pixels. Almost all manufacturers have clauses in their warranties which claim monitors with fewer than some number of dead pixels are not broken and will not be replaced. The dead pixels are usually stuck with the green, red, and/or blue sub-pixels either individually always stuck on or off. Like image persistence, this can sometimes be partially or fully reversed by using the same method listed below, however the chance of success is far lower than with a "stuck" pixel. It can also sometimes be repaired by physically flicking the pixel, however it is always a possibility for someone to use too much force and rupture the weak screen internals doing this.
Stuck pixels
LCD monitors, while lacking phosphor screens and thus immune to phosphor burn-in, have a similar condition known as image persistence, where the pixels of the LCD monitor can "remember" a particular color and become "stuck" and unable to change. Unlike phosphor burn-in, however, image persistence can sometimes be reversed partially or completely.[citation needed] This is accomplished by rapidly displaying varying colors to "wake up" the stuck pixels.
Glare
Glare is a problem caused by the relationship between lighting and screen, or by using monitors in bright sunlight. Matte finish LCDs and flat screen CRTs are less prone to reflected glare than conventional curved CRTs or glossy LCDs, and aperture grille CRTs, which are curved on one axis only and are less prone to it than other CRTs curved on both axes. If the problem persists despite moving the monitor or adjusting lighting, a filter using a mesh of very fine black wires may be placed on the screen to reduce glare and improve contrast.Copyright 2009 Get You on the Net,BenPearce Inc.
